Source of mulberry leaves:

All the mulberry leaves are from Житомирська область of Ukraine in eastern Europe, with an average altitude of 575 meters. 500 meters to 600 meters is the optimal altitude for planting mulberry trees. The average sunshine exposure time of vegetation there is 14 hours, and the climate is suitable in that area. Ukraine is between maritime climate and continental climate. The average temperature is 18-19℃ in the northwest, and 23-24℃ in the southeast. The average annual precipitation is about 300 mm, the most ideal growing area for mulberry plants. In late September and early October of each year, picking up mulberry leaves when they are still growing to maintain the moisture of mulberry leaves, so that the silkworm body protein is absolutely adequate.


Silk knotting of silkworm:

As for mulberry leaves above, after nibble inside body microelement reaches a very balanced level, choose big and fleshy ones to spinning. In terms of selection and sampling, at the early stage of cocooning of adult mature silkworm, the continuous long fibers can be formed by the continuous solidification of the secreted filament, and the silk materials produced here are known as the "Fiber Queen" in Europe. Disinfection is done by sandy soil instead of pesticide, and no artificial hypnosis is used for silkworm worm to increase the amount of silk spinning and make it grow naturally. Proportion of composition: Water content 1.4%; Ash content 1.14%; Protein 96.81%; Ether-soluble extractive 0.26%; Fiber 0.39%. With soft and smooth tactile impression, rich in elasticity, without unity block, fine and flexible, high gloss, average fiber strength than the European standard 2.3 mm.


Appropriately adding

Silk weaving Milan, save the nutrient by vacuum transport. Most of the world famous fashion brands gather here, hence, pure silk processing technique is out of the ordinary. Besides, the degree of fiber damage caused by processing methods is the lowest in the world. After pure silk embroidery is used, the tilt angle, color saturation will be limited, and protein content will be too high, long-term preservation is easy to cause insect corrosion and decay. In this regard, add as appropriate in actual processing: 1%---2% wool; 2%---4% fiber; 0.5%---7% chemical fiber; 0.5%---1.5% cotton. Natural dyeing, without chemical addition of pigment. Splitting lines according to actual needs, Clemon specialized technique features silk thread split into 16 strands, up to 1/16 of the standard silk thread.


Distribution proportion:

In order to ensure permanent color retention, Clemon technique determines the proportion of raw materials to be used according to where the art is stored.

Raw material Cold temperate zone Intermediate temperate zone Warm temperate zone Subtropics Hot strip
Pure silk 90% 89% 88% 87% 85%
Cotton 1.5% 1% 1% 1% 0.5%
Fiber 4% 4% 3% 3% 2%
Wool 2% 2% 2% 1% 1%
Chemical fiber 0.5% 1% 2% 4% 6%
Rubber fiber 1% 2% 2% 2% 3%
Polyester fabric 1% 1% 2% 2% 2.5%